The owners comments sent with
the photo "the installation went well on
my Honda CRV, once I discovered how to carefully remove some internal trim. I
hope the above are useful to you. For information, I ran the wires from the
N/S rear light unit, down behind the bumper, through into the "unused spare
wheel well" where I fixed the control box. I then ran behind the trim
panels to the display location on the rear n/s pillar. As you can see I only
installed 3 sensors, as I thought that the spare wheel cover may give false
readings due to its proximity to a fourth further sensor directly under it. The
system works extremely well, as long as I remember to add 30 cm on for the
Spare wheel overhang. I am a very satisfied customer,"
Please note that these photo's are of customers' vehicles and should be used for informational purposes only, the installation instructions supplied with the Parking Sensor kit should be adhered to at all times.
Please Note that Parking Sensor systems are designed to be a drivers aid and should not replace the need to drive carefully, we will not accept liability for damage or loss resulting from improper installation or use of this product, infringement of the vehicle manufacturer’s warranty or injury or loss resulting from any accidents however caused.
![Visa Delta [1258 bytes]](http://security-gadgets.co.uk/photos/VISD.gif){kind=small}
